 |
| What You'll Need |
What You'll Need
- Masking Tape ($1)
- Mod Podge ($4)
- Plastic Knife ($1/Package)
- Canvas/Board
Things to Consider
Wider masking tape works better and uses less pieces to cover a large surface. Light beige masking tape is easier to cover with paint, but other colors works just the same.
Step 1:
Tear off various length strips of masking tape. Crinkle each strip so that it wrinkles the tape. Ensure that the wrinkled tape is still sticky in various areas so that it can be adhered to the board.
 |
| Tear off various lengths of masking tape strips. |
 |
| Crinkle areas of the strip so that it will not adhere completely flat to the surface. |
Step 2:
Apply the tape sticky-side down onto the surface. Burnish the tape to ensure it sticks properly.
 |
| Apply the tape to the board surface and rub it to help it adhere. |
Step 3:
Continue to add strips of crinkled tape to the surface. Layering and overlapping the tape will create a thicker, more consistent texture.
 |
| Overlapped masking tape layers. |
Step 4 (Optional):
Generously spread Mod Podge with a plastic knife over the masking tape. The Mod Podge will seal the tape and help keep it adhered to the board. Once complete, set the board aside to dry until the Mod Podge is clear.
 |
| Spread Mod Podge over the entire masking tape surface. |
Variations
Crumpled tissue paper and crepe paper can be used to create a similar texture. However, the paper has to fully dry before layering anything on top of the texture. Masking tape, on the other hand, can be adhered to the surface and will stick without the use of a sealer. Tissue paper and crepe paper also tear easier when being glued to a surface.
Any other tape can be used instead of masking tape. Masking tape is often a better choice for collaging because it has a semi-porous surface and paint can adhere better.
Finished Masking Tape Collage Examples
 |
| Masking Tape Example #1 |
 |
| Masking Tape Example #2 |
